Please look at the 2nd picture. You have to let us know which ends you need. If we don't hear from you, we will guess to our best knowledge which ends you need.

Please let us know which ends you need. (SEE 2ND PICTURE):
- #1, ONE PIECE PLASTIC PLUG WITH 2 CONNECTORS INSIDE.
- #2, ONE MALE & ONE FEMALE END PLUGS
- #3, 2 MALE END PLUGS.

* 1980 to 1982 MX80 is Male Bullet  /  Ground Loop


YOU ARE BUYING: 1 NEW (AFTERMARKET) RUN / KILL SWITCH

THIS WILL FIT ANY MOTORCYCLE or ATV WITH 7/8 INCH BARS.

FITS:
- 1980 & 1982 YAMAHA MX80 MX80

WIRE LENGTH IS APPROXIMATELY: 29 INCHES LONG

NEED A DIFFERENT END ON THE WIRE? LET US KNOW, WE HAVE FEMALE & MALE SPADE ENDS, GROUND LOOPS, ETC.... PLEASE REQUEST YOUR END CHOICE.

THIS IS MUCH BETTER THAN A PUSH DOWN KILL SWITCH IN THE WAY THAT YOU SIMPLY FLIP THE SWITCH & BIKE TURNS OFF. WHERE A PUSH STYLE SWITCH YOU HAVE TO HOLD DOWN UNTIL THE MOTOR STOPS. TIRED OF HITTING ROCKS & CAN'T GET YOUR BIKE TO TURN OFF? USE THIS KILL SWITCH!!


WE HAVE THIS IN HAND RIGHT NOW TODAY. WE SHIP VERY FAST. BUY HERE WITH CONFIDENCE.


HOW DO YOU HOOK UP THE KILL SWITCH?
- ONE WIRE IS GROUNDED, MAKE SURE IT HAS A GOOD SOLID GROUND.
- THE OTHER WIRE WILL NEED TO BE CONNECTED TO THE WIRE THAT COMES OUT OF THE IGNITION COIL, USUALLY IT IS BLACK WITH A WHITE STRIPE.

On Dec-26-13 at 18:28:44 PST,