This clock is composed of a lot of white rings distributed in circular layout, thus forming a strong geometrical mark.

- Material: the selection of the raw material was based on the principle to keep the natural appearance of the wood as much as possible - therefore plywood was selected for it bears the wood grains still strong and thin enough.

- Manufacturing process: the dial of this clock is laser cut from a single 6mm birch plywood board, the finishing (polishing, painting) is made by hand. The dial is painted white.

- The movement: is silent / non ticking, second hand sweeps around. It runs with 1pc. AA type 1.5V battery (not included in the package). Standard plastic / metal hands are red.

- Dimensions: 
diameter: 

• M - 29cm (11½")
• L - 41cm (16")
• XL - 59cm (23½")

depth: 3,3cm (1¼")
wieght: 0,35kg (0.8lb) / 0.55kg (1.2lbs) / 1kg (2.2lbs)

This item is made to order, usual processing time is ~1 week.