MOOER MICRO LOOPER

Micro Looper

 

MICRO LOOPER inherits the MINI size of MICRO SERIES. Record, playback, stop, overdub and delete, all these functions can be controlled by one single footswitch. This gives you an easy and direct operation experience. MICRO LOOPER has up to 30 minutes of recording time and unlimited overdubbing times. You can focus on your music and need not to worry about other troubles.

Product features:

1.True Bypass

When Micro Looper is in the Bypass status, it would not affect the original signal,which ensures your signal to be clear and lossless.

2?Recording Time

Micro Looper has up to 30 minutes of recording time, enough for you to record down your songs.

3.Unlimited overdubbing times

Micro Looper has no maximum limit for the overdubbing times.

4?High quality sound restoration

Using high quality electronic components which ensure the playback audio signal as clear as the way they are recorded, you will never lose any detail.

5.Mini Size

Inherit the Mini size of the MICRO SERIES pedals, your pedal board can have more space and therefore you can put more pedals in it.

6.Loop level knob

This little knob can control the volumn of loop. Can’t hear your SOLO? Turn down your volumn a little bit!

7.Easy operation

Stop/Delete/Redo, all these functions are controlled by just one footswitch. 8.Loop saving function

Worry about losing your recordings after you cut off power? No need to worry, MICRO LOOPER will save all the loop recordings data automatically when the power is off. You will never lose your inspiration!

MICRO LOOPER Operation

How to record Loops/overdub

To start recording, press the footswitch once,the LED will be lit in RED,

indicating Micro Looper is in Record mode.

To switch to playback,press the footswitch again to quit Record mode.

The LED will turn BLUE,and start playback.

You can record another loop based on the original loop(Overdub),

press the footswitch while the original loop is playing back,the LED will

turn RED, indicating Micro Looper is in Record mode again.

Press the footswitch once again to quit Record mode. The LED will

turn BLUE. Micro Looper will playback both the original loop and

the newly added overdub recording.

How to Undo recordings

To delete your last recording,simply press and hold the footswitch

for 2 seconds or longer.The LED will blink twice rapidly.

Then the recording will be deleted.

How to Redo recordings

If you deleted your last recording but you want it back ,you can restore it

by simply pressing and holding the footswitch for 2 seconds or longer.The LED

will blink twice rapidly.Then the recording will be restored.

How to stop/start/delete the loops

To stop the loop playback, press the footswitch twice

quickly.The LED will start blinking in BLUE.

To start the loop again,press the footswitch once.

To delete everything you have recorded, press the footswitch twice

quickly and hold down on the second press.The LED will turn off,

indicating all the loop date have been deleted.