Trigger & Timekeeping Battery Clock Movement Set with Train Sounds
The sound module and movement must be spliced together. The wires are non directional when splicing.
This is a brand new movement, battery
case, speaker, all mounting hardware and hands (if requested above). It can be used as a new movement in a clock you have
built or a replacement movement set for existing sound making clocks.
This particular set plays the sound of a train on the track, warning whistles and locomotive bells at the top of the hour ONLY. There is no night shut-off for the sounds.
Choose from 2 shaft lengths:
- Small = Threaded shaft length of 1/4", overall length of 9/16"
-
Medium = Threaded shaft length of 5/8", overall length of 15/16"
Please make sure it will fit through the hole in your clock face/dial and reach the front but not be too long and hit any cover you may have! The movement case size
is 2-1/8"W x 2-1/8"H x 9/16"D. Shaft
diameter is 5/16". Rear hand set knob for setting the time. Requires 1
'AA' battery in the movement and 2 'AA' batteries in the sound module,
not included. The sound module battery compartment is 2-3/16"W x 2-3/8"H. 7"
wires are pre-attached to the speaker, circuit board, battery
compartment and test button. The Trigger movement comes detached with 5"
lead wires for attachment to the sound module lead wires.We
also sell other Trigger Sound Movement sets in our store with 16 melodies or train sound options. We also sell the Trigger movement by itself in a pendulum or non-pendulum version.