Motorola SBG901 DOCSIS 2.0 Wireless G Cable and similar items

You can reset it to factory defaults or use the password info included with the modem to configure as needed. Thanks for looking! SBG901 Features General Availability: discontinued Warranty: 1 year(s) LAN / WAN Connectivity WAN throughput: 38 Mbps WAN throughput upstream: 30 Mbps WAN ports: 1 WAN port(s) type: Coax F-connector LAN ports: 1 LAN ports type: 10/100 Base-TX (RJ-45) LAN ports auto cross-over: Router NAT routing: Multihomed: DMZ: Port forwarding: Port triggering: DHCP server: Dynamic DNS client: QoS: UPnP: Routing Protocols: RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) Cable Modem DOCSIS compliance: DOCSIS 1.1 DOCSIS 2.0 Wireless Maximum Wireless Speed: 54 Mbps WiFi standards supported: 802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) Wifi security/authentication: WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) RADIUS authentication WiFi modes: Access point internal antenna(s): 2 WDS compatible: WMM (QoS): WPS (Wi-Fi Protected Setup): VPN IPSec IPSec passthrough: L2TP L2TP passthrough: PPTP PPTP passthrough: Firewall SPI firewall: DoS / DDoS protection: Intrusion Detection System (IDS): Security log: Filtering: Domain/URL blocking, IP Address filtering, MAC Address filtering, packet filtering, keyword/content filtering, date/time scheduling, Proxy, Java, ActiveX, Cookie Device Management Default IP address: 192.168.0.1 Default admin username: admin Default admin password: motorola Administration: Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard Firmware upgradeable: Configuration backup/restore: Email alerts: Event log: Diagnostic functions: ping, traceroute Misc hardware info SNMP support: SNMP v.1, SNMP v.2, SNMP v.3 Links Datasheet: http://www.speedguide.net/images/hardwar... Manual: http://www.speedguide.net/images/hardwar...