Amplifier Module 350w 4ohm with source AJK and similar items

ACTIVE BOX AMPLIFIER WITH BIVOLT SOURCE (RCA) 350W 2 CHANNELS 4 OHMS (3344) Model with RCA input. APPLICATION ? Spongebob box ? Residential home box ? Active box ? Trio box ? Residential sound, office, commerce, ambient sound, etc. ? Between others APPETIZER ? 2 RCA inputs (R+L) with 180mV RMS sensitivity for a 12v Player ? 1 remote input for the Player (it is also possible to use a player without a remote output) POWER ? Number of channels: 2 Total power of 350 W RMS @ 4ohms divided into: ? 73% BASS (low-pass): 256W RMS @ 4 ohms ? 20% HIGH (high-pass): 70W RMS @ 4 ohms ? 7% 12V Auxiliary Output: 24W RMS @ (12v/2a) ? Minimum Impedance BASS Channel: 4 ohms ? Minimum Impedance HIGH Channel: 4 ohms OUTPUTS ? 1 subwoofer output: BASS (low-pass) crossover LPF 90Hz (or full-range via selector switch) ? 1 output for horn and tweeter: HIGH (high-pass) crossover HPF 90Hz ? 1 output for powering a 12v player and for lighting with any 12v control panel, strobe or LED strips ? Recommended output cables: Minimum 1.5mm DISPLAY ? On/off button ? HIGH gain adjustment equalizer button ? BASS gain adjustment equalizer knob ? BASS channel crossover switch between low-pass or full-range ? Blue POWER LED: indicates that the Active Box is on ? Yellow CLIP LED: indicates when there is distortion in the BASS output ? Red LED PROT: indicates thermal protection, overload or short circuit INSTALLATION ? Compact design for recessed installation ? Pay attention to the installation tips in the manual to preserve and make the most of the Active Box FOOD ? Autovolt power supply: 90 A 240V automatic, that is, it is bivolt 110v and 220v ? 1.4 meter power cable with 10A three-pole socket standard NBR 14136 QUALITY ? Individually tested in AJK quality control ? Automatic cooler: turns on by itself only when the amplifier heats up, increasing the cooler?s durability ? Thermal protection ? Overload and short circuit protection SPECIFICATIONS ? 1.4 meter power cable with NBR 14136 standard three-pole socket ? Cut in the box for installation: 115mm x 42mm ? Minimum installation depth: 180mm ? Dimension LxWxH: 160mmx150mmx60mm ? Weight: 480g