Another Skookum RC Exclusive Innovation - Arrma Limitless Full Front Wing Assembly. This awesome looking full front wing offers improved downforce and aerodynamic efficiency. Wider than the stock limitless wing to help redirect air around and over the front tires, this design is aimed at increasing downforce (grip) and reducing the drag that the stock front wing creates. The air foil of this front wing is specifically profiled so that it helps keep the car on the ground and wheels in contact with the surface - It plays a major role in ensuring sufficient grip and traction for your RC car, especially at high speeds. This front wing replaces the stock Lexan nose and wing of your Arrma Limitless. It also replaces the inner front chassis brace and provides an even more rigid front end, as this front wing uses all 5 of the splitter mounting holes to both anchor the wing to the chassis/shock tower and spread the wind-load evenly across the width of the car. Made from impact resistant black ABS plastic, can be fitted and used 'as is' (as per the photos) or primed and painted to match your specific colour scheme. Can be used with or without a front splitter depending on your preference (photos show with an without the splitter fitted). In our testing we preferred the feel of the car with both the wing and the splitter fitted. This front wing requires some basic assembly and all screws required are included. Instructions can be provided on request. We recommend leaving all the screws loose until the 5x splitter screws are in place, then hand tightening the 4 lower nose screws and then finally the 2 front shock tower screws. We also sell fully adjustable rear wings for the Arrma Limitless as well as other parts and accessories - Check out our shop before you checkout! Postage is FREE via Royal Mail 1st Class (UK Only) and $17USD for the rest of the world and items are dispatched within 24 hours of receiving payment.