Pigmented Epoxy Floor Coating 100% Solids From SureCrete (3 Gal Kit) ColorTec 500 Pigmented Epoxy Floor Coating is a 2 component 100% solids, zero VOC epoxy floor coating system that is used in a wide variety of applications: as a high build color coat for a different decorative concrete systems, and as a primer coat and binder coat for Dura-Kote Flakes and Metallics. The high performance, self-leveling characteristics generate the premier balance of strength, flexibility, and chemical resistance that is both user-friendly and extremely durable. Pigmented 100% epoxy floor coating may be utilized in a large variety of design applications, including, but not limited to the Except Dura-Kote Epoxy Flakes and Dura-Kote Epoxy Metallics systems. Pigmented 100% epoxy floor coating may be utilized in application of more creative, three-dimensional coatings. ColorTec 500 Pigmented Epoxy Floor Coating is ideally suited for any commercial or residential setting: - manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, gyms, locker rooms, stadiums, living area applications, commercial flooring applications, or anywhere that an exceedingly resilient floor is desired. PACKAGING 3 gal. (11.4 L) kit 1 - 3 gal. (11.4 L) short filled pail containing 2 gal. (7.6 L) part A (pigmented) 1 - 1 gal. (3.8 L) pail part B MIXING RATIO 2:1 (2 part A to 1 part B) PIGMENTED EPOXY FLOOR COATING COVERAGE: As color coat: approximately 100 ? 150 ft per gal. (9.3 ? 13.9 m per 3.8 L) 10.7 ? 16 mils For thick build: 40 ? 70 ft per gal. (3.7 ? 6.5 m per 3.8 L) 23?40 mils The whole Epoxy Metallic coat system includes: 1. Primer Coat: Dura-Kote Pigmented Epoxy 100 OR Dura-Kote Water Based Pigmented Epoxy Coating (1 Gal Kit) (As 1st coat approximately 125 - 175 ft per gal. For smooth surface or second coat approximately 200 -250 ft per gal.) 2. Top (Metallic) Coat: Epoxy 100 3 Gal Kit Mix of: Dura-Kote Metallics 1?pint (.47 liter) to Dura-Kote Clear Epoxy 100 (DK 500) 3?gallon (11.4 liter) epoxy kit 40 ? 70 ft per gal., i.e. 120 ? 210 ft for 3 Gallon Kit 3. Finish Coat Select one of the following options: Dura-Kote PFC 120 DK 400WB. Polyurethane Water Based DK 400. Polyurethane Solvent Based. High Gloss ATTENTION INTERNATIONAL BUYERS ALL TAXES, DUTIES AND LOCAL FEES AT THE DESTINATION COUNTRY WILL BE PAID BY BUYER. OUR SHIPPING COST INCLUDE DELIVERY TO A DESTINATION ADDRESS ONLY. ALL GLOBMARBLE PRODUCTS ARE SHIPPED FROM THE UNITED STATES