US Warehouse - FREE FAST Shipping in USA Product Description: Heavy Duty 7 gauge 3/16" steel, powder coated to resist rust and corrision 3/16" plate steel Coming with a new set M8x1.25 25mm Bolts Deck spindle reinforcement ring for John Deere Mower D100 D110 D120 D130 D140 D160 Deck spindle reinforcement ring for John Deere Mower L100 L110 L120 L130 LA105 LA165 X110 X120 X140 Perfect Ring to Repair cracked or broken deck spindle mount hole or use for adding strength to prevent damage This is a new Mower Deck reinforcement ring made from strong 3/16" plate steel. And then Powder coated to resist rust and corrosion. Included is a set of M8 X 1.25 25MM bolts these will replace the factory bolts only. If you have bought aftermarket self tapping bolts they may be 5/16X18 if so you will need to go to the hardware store and buy a longer bolt. DO NOTE, Very Important: Please note all lawnmower spindle are assembled using self tapping mounting bolts if you are replacing the spindle also it will not have threads in the mounting holes when you get it that is just the way they do it. The bolts from the factory holding in your spindle are self tapping but if they break off trying to remove them you will need new self tapping bolts or Thread the holes with a tap. If they do not break off your good just use one of the bolts to thread your new spindle The bolts in this kit are not self tapping they are just longer because of the thickness of the plate Works on these models D100, D110, D120, D130, D140, D160, L100, L110, L120, L130, LA105, LA165, X110, X120, X140 Thank You for Shopping!