I developed a bracket to make a universal towel rack for standard utility sink and thought others could use it. What you get: two brackets (one left and one right) What you need: a 3/4" wood dowel or 3/4" OD PVC pipe. What you do: Cut to your desired length 16" -18". Slightly taper the sharp ends of the dowel/pipe just to remove any burrs. Insert and press into one bracket. Set on flat surface to align the second bracket and slightly press in. Place assembled towel rack on on end and completely press in the second bracket. If you have a dowel that is a little undersized, there are holes in the bracket ends for small screws. (not included) Towel Rack can be used on the inside or outside of the sink. Available in Black or White. Specify at ordering Hope you find useful, we have!