ER5356 - MIG Aluminum Welding Wire - 1 Lb X and 21 similar items

Fast Shipping On All Items 30 Days Money Guarantee Customer Support Excellent Service 100% Satisfaction Satisfaction Guaranteed ER5356 - MIG Aluminum Welding Wire - 1 Lb X 0.035" (4 SPOOLS) Specification Item model number 5356W4x35 Part Number 5356W4x35 Batteries Required? No Item Package Quantity 1 Material Aluminum Item Weight 4 pounds Batteries Included? No Size 0.035" - (4 Spools) Package Dimensions 8.15 x 4.65 x 4.37 inches Manufacturer TGB 4.65 inches x 8.15 inches x 4.37 inches. Weight: 4.0 lb Item Description ER5356, commonly referred to as ?AlMg5,? is a 5% magnesium aluminum wire used for welding base metals 5050, 5052, 5083, 5356, 5454 and 5457 This MIG wire has become the most widely used aluminum welding wire because of its compatibility with so many different base metals and better corrosion resistance in salt water Weld deposits have good ductility and higher tensile strength although it is not suitable for temperatures sustained above 150F (65C) Melting range is 1060F ? 1175F, density is 0.096 lbs/in3 and post anodizing color is white 1 Lb of wire per Spool - Available diameters: 0.030", 0.035" and 0.045" - Available Spool Quantities 1, 2, 4 and 6-Pack. Select your choice from the menu. ER5356 - WIRE - MIG (GMAW) ? ALUMINUM AWS A5.10 Welding Positions: All, except vertical down INTRODUCTION: This is one of the most commonly used aluminum welding alloy. It is a general purpose filler alloy for welding 5XXX series alloys with 5% magnesium for high strength, extremely resistant to corrosion and resistant to sea water. Suitable for subsequent anodization. USES: Materials: AlMg3, AlMg4,5, AlMg5, AlMgSi1, G-AlMg3, G-AlMg3. Automotive bumpers and supports, structural frames in the shipbuilding industry, formed truck panels, railing industry, power industry, trailer manufacturing. CHEMICAL COMPOSITION (%): Chemical Composition Al Si Fe Cu Mn Requirement Balance ?0.25 ?0.4 ?0.1 0.05-0.2 Typical test result Balance 0.06 0.10 0.03 0.11 Chemical Composition Mg Zn Ti Be Cr Requirement 4.5-5.5 ?0.1 ?0.06-0.2 ?0.0003 0.05-0.2 Typical test result 4.85 0.002 0.15 0.0002 0.09 WELDING PARAMETERS (DC+): Diameter WFS (ipm) Amps Volts (lb/100 ft) Argon (cfh) 0.030? 480-626 60-175 15-24 0.65-1.25 25-30 0.035? 450-750 70-185 15-27 1.0-4.25 30-35 0.045? 330-500 125-260 20-29 1.0-4.25 35-45 1/16? 250-450 170-300 24-30 3.8-6.6 45-75 Shielding Gas: 100% Argon, Argon / Helium Mixtures The above parameters are for reference purpose and depend on diverse factors. Run tests, evaluate and set your welding parameters before starting the welding job. Return Policy ? We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product. ? Returns will be voided if the product is mishandled or physical damaged by customer. ? Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem. ? Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied. ? All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed. ? Please contact us before returning. Feedback ? We appreciate your feedback and our system will automatically leave feedback for you after bid ends. ? Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction. Payment Options Shop With Confidence