110V 3CFM 1/4HP Single Stage Rotary Vane Air and similar items

Fast Shipping On All Items 30 Days Money Guarantee Customer Support Excellent Service 100% Satisfaction Satisfaction Guaranteed 110V 3CFM 1/4HP Single Stage Rotary Vane Air Vacuum Pump HVAC A/C Refrigeration Kit AC Manifold Gauge Set R134A R12 R22 R404A R410A with Carrying Bag/Tote Specification Item model number SH-0352 Brand YaeKoo Country of Origin China Manufacturer Part Number SH-0352 Item Weight 18.48 pounds Package Dimensions 16.14 x 12.6 x 11.81 inches Manufacturer Long Time Trading 12.6 inches x 16.14 inches x 11.81 inches. Weight: 18.48 lb Item Description This 3cfm 1 Stage 1/4hp Rotary Vane Vacuum Pump Manifold Gauge set Comes with 3 Hoses, the Hose connection :1/4" 3 CFM 1/4 HP single-stage rotary vane vacuum pump Diagnosis R134A R12 R22 R404A R410A 3 color coded hose approximately 43 inches long: red/blue/yellow Silicone inhibition index; Product Description High quality manifold with quick coupler: Manifold Red Gauge (high): 0-800 PSI Manifold Blue Gauge (low): 0-500 PSI Gauge Reading for R12, R22, R134a, R410a Red hose: 800psi-4000psi Blue/Yellow hose: 600psi-3000psi Hose length: 47 inch Manifold fitting and hoses: 1/4" Quick Connetors: 1/4?male SAE 1/4 HP 3 CFM Air Vacuum Pump: 110V 60Hz 1/4 horsepower motor 3 CFM single-stage rotary vane vacuum pump High efficiency and low noise, built-in large capacity cooling fan, long - term use Storage bags to keep equipment clean and none dust The drain plug is located at the bottom of the reservoir Manifold gauge Blue standard (low): diameter 2-1/2 ", 0-500 PSI Red gauge (height): diameter 2-1/2", 0-800 psi Includes 3-color coded 43-inch hose;(red hose 4000 psi / 800 psi;Blue/yellow hose 3000 psi / 600 psi) Applicable to R134A, R12, R22, R22A, R404A, R410A, etc. Air Vacuum Pump Kit Including: The package includes 1/4 HP 3 CFM air vacuum pump, AC manifold gauge set, 3 colored hoses, 1 bottle vacuum pump oil, 2 R410a adapters, toolkit bag, etc. This kit are used for automotive air conditioning, HVAC work, refrigeration and industrial requirements that need high vacuum pull from a compact pump. Precautions for vacuum pump maintenance 1. This product strictly prohibits the extraction of flammable, explosive, and toxic gases; 2. This product must not remove gases that are corrosive to metals and can react chemically with pump oil; 3. This product must not remove gases containing particulate dust and a large amount of water vapor; 4. The temperature of the extracted gas shall not exceed 40 ?, and the operating environment temperature shall be between 5 ? and 60 ?; 5. This product cannot be used as a compression pump or a delivery pump: 6. It is strictly prohibited to operate without oil; 7. When the pump is running, it is strictly prohibited to block the exhaust port; 8. - The voltage used for this product is 192-248V, 50HZ, and the socket must be grounded; -When unplugging the power supply, be sure to hold the plug and not pull the power cord; - Do not place heavy objects on the power cord, do not allow the power cord to be squeezed; - Do not use damaged plugs and sockets; - Do not use damp hands to plug or unplug the power plug; - Do not plug or unplug the power plug or press the switch in areas with gas leaks. 9. Wear protective goggles when working with refrigerant; 10. Do not directly touch the refrigerant to prevent personal injury caused by the refrigerant; 11. When connecting to the power supply, it is required that all relevant equipment be properly grounded to prevent the risk of electric shock; 12. Due to the surface heating during pump operation, please do not touch the oil tank or motor casing during operation. Precautions for customers before starting up 1. Upon receiving the new machine, check if there is any obvious damage to the machine and if there is any leakage from the matching oil bottle 2. Confirm that the machine is in good condition. You can unscrew the filter on the oil tank and directly fill it in. After all the oil bottles have been filled, the machine will stand still for a while and the oil mark line at the oil mirror position will be visible 3. Plug in the machine, turn on the switch, and the machine is running. At this time, you can unscrew the intake nozzle of the vacuum pump, block the intake nozzle with your hand, and feel if your fingers are being sucked. If so, it is judged that the vacuum pump is functioning properly and can be vacuumed normally 4. When the machine is running for a long time, do not open it and directly extract the atmosphere. Connect pipes or other equipment to operate and extract the vacuum. If the vacuum is extracted for a long time, it may cause the motor to burn out, so it is important to pay attention Gauge Maintenance The refrigerant meter pointer does not point to 0 Solution: Remove the gauge cover, unscrew the plastic case, use a flat screwdriver to clamp it on the screw above the dial scale, turn it, and you can see that the dial pointer will move. Adjust it to position 0. Vacuum pump often emits smoke and does not work 1. Be sure to add oil for use. The machine may produce a small amount of oil smoke during operation, which is a normal phenomenon. Add oil to the middle position of the oil mirror 2. If the pump is used for refueling but is in an open atmosphere, the oil fumes will increase. Only by connecting the equipment properly and not opening it for air extraction, there will be a small amount or even no oil smoke during the operation of the vacuum pump? 3. If the machine is not working, it is necessary to first determine whether the new machine is not working or if it has been used for a period of time. If the new machine is not working, it may be due to a collision during transportation that caused it to get stuck somewhere. You can try removing the fan cover, turning the fan blades clockwise, and then restarting after the rotation is smooth. If the machine does not work after running for a period of time, it may be due to poor gas extraction or improper use, resulting in the motor getting stuck. The above method can also be tried? Return Policy ? We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product. ? Returns will be voided if the product is mishandled or physical damaged by customer. ? Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem. ? Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied. ? All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed. ? Please contact us before returning. Feedback ? We appreciate your feedback and our system will automatically leave feedback for you after bid ends. ? Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction. Payment Options Shop With Confidence