BlueSCSI v2 Internal 50-pin 3.5" SCSI Drive and 9 similar items

ToTs RETRO An Official Authorized Vendor of BlueSCSI-v2 BlueSCSI v2 3.5" Internal 50-pin SCSI Emulator, Brings the Future into your Retro Vintage Computer. This Device effortlessly emulates up to 7 Simultaneously. Hard Drives, CD-ROMs, Tape Drives, MO, Zip and even network Adapters. BlueSCSI is your all-in-one solution. Swap your aging mechanical drive for Solid-State reliability, Powered by Raspberry Pi Pico 2w (RP2350) up to 33% faster than previous models. BlueSCSI v2, takes your Vintage Computers into the future. Works with Macintosh, Amiga, Atari, PC and More. If your computer has an SCSI interface, chances are BlueSCSI v2 is your answer. This BlueSCSI v2 is Assembled By ToTsRETRO, a division of ToTsRC Made with Raspberry Pi Pico 2w (2350) dual Arm Cortex-M33 cores, and a pair of open-hardware Hazard3 cores Emulate up to 7 devices at the same time! All on one SD card (not included), allowing you to have Multiple OS's on the Same SD Card, your card can Hold Hard Drive Images, CD-ROMs, Zip, MO and more Replace your expensive hard to find SCSI Hard Drives with new Modern Tech-Features the new Pi Pico 2w 2350 board for 33% faster performance than previous models Insert and SD card and go. (did i mention, these are SUPER QUIET) Expand your capabilities with BlueSCSI Toolbox, a suite of powerful applications that run directly on your vintage computer. Features like File Transfers, CD Swapping and Wi-Fi Settings all within the computer. Currently working for Macintosh, Amiga, Atari, DOS, Windows and IRIX Getting Started is a breeze, Just name your disk image files and go?For more Documentation visit BlueSCSI and/or GitHub BlueSCSI/BlueSCSI-v2. This is a fully open and community driven product. When working with Vintage or Retro Computers, I personally use and recommend a 32GB SD card (not included), preferably one for Video Surveillance or made for recording security video as these last much longer than normal SD cards Looking for the External Version? Click here--- https://www.ebay.com/itm/177327335243 Looking for the Powerbook 2.5 inch Version? Click Here---- https://www.ebay.com/itm/177327361032 Modern Reliable Swap out your aging mechanical drives for solid-state reliability. Powered by Raspberry Pi Pico 2w 2350 (faster and better) , BlueSCSI replaces expensive, rare parts with modern tech. Just pop in an SD card and go! Incredibly Versatile Emulate up to 7 SCSI devices at once! Hard drives, CD-ROMs, tape drives, MO, Zip, and even network adapters. BlueSCSI is your all-in-one SCSI solution. Simple Well-Documented Getting started is a breeze. Just name your disk image files and go. Our extensive, community-written documentation?with over 800 edits from 80 contributors?has you covered for everything else. Explore the docs! Fully Open Community Driven BlueSCSI is more than just a product; it's a passion project built by and for the retro computing community. Both the hardware and software are completely open-source. This means you can build your own, modify it, and contribute to its future. Our strength is in our shared love for vintage tech. Our documentation is a testament to this community spirit, with over 800 edits from 80 contributors. Dive into the Documents to find guides, troubleshooting tips, and much more. Wi-Fi Enabled With a Pico-W, your BlueSCSI can emulate a DaynaPORT SCSI/Link, bringing wireless networking to your vintage machines. Browse the web, connect to FTP sites, and more! Initiator Mode Preserve your original SCSI drives! Initiator Mode allows you to connect a vintage drive directly to your BlueSCSI and create a perfect disk image on the SD card. It's an invaluable tool for data archival. Ultra SCSI Fast20 Push the limits of your hardware with SCSI Fast20 support, achieving speeds up to 18MB/sec. Unleash the full potential of your high-end vintage workstations. Unlock More with the BlueSCSI Toolbox Go beyond simple drive emulation with the BlueSCSI Toolbox, a suite of powerful applications that run directly on your vintage computer. This unique feature allows you to interact with your BlueSCSI in ways no other SCSI emulator can. Available Directly on the BlueSCSI website. File Transfers Easily move files between the SD card and your vintage machine. CD Swapping Change CD images on the fly without ever touching the SD card. System Control Configure Wi-Fi settings and manage your BlueSCSI directly from your classic OS. Available for: Classic Macintosh, Amiga, Atari, DOS, Windows, IRIX and more coming soon! For All Complete Documentation head over to BlueSCSI Website. For Further Detailed Instructions and Current Software and Drivers, head over to Github with a /BlueSCSI/BlueSCSI-v2 More information is also available at Discord servers search #bluescsi and at TinkerDifferent. The BlueSCSI V2 firmware is a fork of ZuluSCSI, which also includes SCSI2SD V6 source code: ZuluSCSI SCSI2SD BlueSCSI V1 ArdSCSIIno-stm32 BlueSCSI? - Eric Helgeson - All rights reserved. This works with All SCSI Macs, Mac Classic, Mac Classic II, Mac Color Classic, Apple Macintosh Performa 575, Apple PowerMac , Apple Power Macintosh, Apple Computer, ,CMD HD 4000, Commodore Amiga 2000, Amiga 3000, Amiga 4000 These models had built in support for SCSI. NextCube, Next Workstations, Sun Microsystems, Some Atari with SCSI Capabilities and PC's with SCSI Capabilities. ALL units are tested before being Shipped and come ready to install. If you have any questions, please do not hesitate to reach out. Thank you for Stopping by and I hope we do Business. Support Local Small Family Business Listing and template services provided by inkFrog