Viking Sprinkler Guard Model #B-1 and 50 similar items

New, old stock, unused without original packaging. Viking Sprinkler Guard #B-1 Dimensions: 4-3/8” (111.1 mm) diameter, 0.0359” (0.91 mm) thick. Viking Model A-1, B-1, and C-1 Sprinkler Water Shields and Guards are used in conjunction with Viking frame style upright or pendent sprinklers where allowed by the approvals. The guards are hard-wire cages designed to encase the sprinklers and protect them from mechanical damage. They are recommended for areas where sprinklers are installed at a low elevation and/or near a high degree of human or mechanical activity. Water shields protect the sprinklers’ heat-sensing operating element from water spray discharge from sprinklers located at a higher elevation. Viking frame style sprinklers with Model B-1 or C-1 Water Shields are converted to intermediate level/rack storage sprinklers. They may be used in any application where water shielding is required, such as in-rack sprinkler systems, under grating, on pilot sprinklers for deluge systems, and outdoors as a weather shield.