Ultrasonic industrial humidifier cooler sprayer 6KG/H 1. Ensure atomized humidifying effects, cleaning the inner machine regular, one time one month, cleaning method as follows: A. Open cover, using soft cloth or brush cleaning atomization device(Do not scratch atomization device as well as water level induction switch, the home detergent can not be used), cleaning the scale, then washing by clean water; B. While watering, do not pour the water into the circuit board to lead to short circuit. C. Close cover 2. Ensure machine runs normally long time, water filter should be regularly cleaned, one time one month, cleaning method is as follows: A. Open the cover of filter; B. Removing dirt from filter; C. Close it again. ? Parameters : 1 .Fog volume: ? 6KG/H 2. Humidity: 1%-99% 3. Power supply: AC110V 4. Power: 650W 5. N.W.: 50.7lbs 6. Control method: humidity control 7. Applicable space: 40-100m (400-1000sq.ft) 8. Hole: 4.3inch?110mm) *1 9. Water supply quality: purified water, tap water (softened) 10. Material: Stainless Steel 11. Air Volume: 160m/h 12. 69*35*47.5cm (27.2"*13.8"18.7") Working principle: The high frequency vibration of atomizing film will throw the water out of the surface and shape the natural and flying water fog, produce water particle of 1-10?and float in the air without heating or adding chemical, so as to achieve humidification. The appropriate relative humidity will have the decisive function in the improvement of product quality, reducing of scrap rate, anti-static, eliminating dust, air purification and environment improvement etc. Note: The product does not have the bucket and accessories, the bucket is only for display, customers need to configure when using. Item included(191106): 1*Ultrasonic industrial humidifier cooler sprayer 1*Hose 2*Key 4*Wheels ?