Parker Compumotor CM232AE-00219 Brushless DC Servo Motor 7500RPM 340VDC 92 oz-in These are used and the condition slightly varies. The pictured unit is a good representation on what to expect. Some slightly better looking some slightly worse. All were working when pulled from service. These were custom ordered and were ran with an external sensor. So the hall effect sensor has been disabled from the factory. In order for these to function properly some software modifications must be made otherwise it will cause a motor fault in the drive. Shaft Diameter: 3/8" Voltage: 340 VDC Peak Current: 8.3A Maximum Rated Speed: 7500 Rpm Torque at Rated Speed: 81 oz-in Stall Torque Continuous: 92 oz-in Shaft Power at Rated Speed: 499 Watts Number of Poles: 4 Encoder Resolution: 1000 Pulses Per Resolution