Store Pella Hinge Corner Entry Door w/ Screws - 4 inch by 4 inch - Stainless Steel 39.9574.50 Description: The first image is of the actual hinge. Make sure to review the location of the screw holes if replacing existing hinges. This is a final sale item, no return services are provided on this item. 4 x 4 Pella Hinge 5/8 Radius Overall Width: 4 inch Overall Height: 4 inch Corner: 5/8 Radius Type: Plain Bearing Pella French Door Hinges Check door operation. Open and close the door to check for proper operation. Make sure the door will latch correctly. Note: If there are any problems with the operation, check to confirm the door frame is installed plumb, level and square. If the reveal between the door panel(s) and frame is not even, adjustments may be made: Doors without adjustable hinges: Plastic shims located behind the hinges may be removed to adjust the reveal between the door panel and door frame. Additional hinge shims may be added if required. Note: Doors with adjustable hinges will have a (+)(-) on the door panel hinge leaf to indicate possible adjustments and doors without adjustable hinges do not have adjustment indicators. Adjustable hinges are not designed to make up for failure to install the door frame correctly. Before adjusting hinges, confirm the door is installed plumb, level and square. MarkdownHardware.com 2025-26 All Rights Reserved