Shim to fix door gap I noticed the door seal in the center was not sealing. Having the fridge for only a few months this concerned me. The fridge included a shim kit to level the doors but the door on the left was higher than the right and has the center flap that closes to seal the center. - The problem was this white lever. It was sitting just below the engagement point on the fridge. Since I open the fridge from the top I was applying pressure downward which caused it to just be under the engagement point. It looks better now after installing the shims that come with the fridge. (pn# DA99-45158A) but it still looked a little low for my liking. Plus I had to have help to install the shims as someone has to hold the door up while the shims are installed. So I decided to make a shim that could be added under the top clip to lower the engagement space. It can also be installed by one person. -- The shim drops it down 3mm. --- Lever sits higher, I am not concerned about it now. Even if the bushings wear out it will engage properly. ---- It's a shame that this issue even exists. I might consider making some of the bottom shims to include in a kit but they really are not needed if you install the top shim and I am not sure how long the bottom shims will last.