Symetrix XIN 4 Audio Input Expander for Symetrix Systems 4 Mic or Line Level The cost effective xIn 4 increases a system?s analog input channel capacity resulting in a reduction in overall price per channel. Designed exclusively for use with Dante-enabled Symetrix DSP units, each of the four analog inputs? parameters (5 gain levels, phantom power), along with bus assignments, are configured using Symetrix Composer open architecture software. xIn 4 set up is logical and fast with no requirement to use third-party software; there are no mechanical switches or circuit board jumpers to set. Systems are simpler, cost less, and have fewer potential points of failure. A half-rack form factor conserves rack space. Optional 1U rack tray and 1/2U surface mount bracket are available for separate purchase. Features: Audio input (A/D) expander for Symetrix systems that capitalizes on the surplus DSP of a Dante enabled Symetrix DSP unit to bring overall system costs down. 4 mic/line inputs, including +48 VDC phantom power, with the industry leading performance specifications of Radius, Edge, and Prism DSPs. Configured with Symetrix Composer. No third-party software, archaic DIP switches, or complicated front panel menus. Network audio expansion using Dante protocol over standard IT networks. Ultra-low latency. PoE Injector included. Optional 1U rack tray and 1/2U surface mount bracket available for separate purchase Specifications: Electrical Specifications ANALOG INPUTS Frequency Response: 20 Hz ? 20 kHz, 0.5 dB. Channel Separation: 111 dB @ 1 kHz, +24 dBu. Connectors: 3.5 mm Phoenix connectors. Number of Inputs: Four (4) switchable balanced mic or line level. Nominal Input Level: +4 dBu with 20 dB of headroom. Maximum Input Level: +23 dBu. Mic pre-amp gain: 0, 11.8, 24, 44 or 54 dB switchable. Mic pre-amp EIN: -127dB with 150 ohm source impedance. CMRR: 76 dB @ 1 kHz, unity gain. Input impedance: 8k Ohms balanced, 4k Ohms unbalanced. Phantom power (per input): +48 VDC @ 10 mA maximum. Dynamic range: 116 dB, A-weighted. THD + Noise: -100 dB, unweighted; 1 kHz @ +22 dBu with 0 dB gain. Latency: 0.28 mS. SYSTEM Sampling Rate: 48 kHz, 100 ppm. Dante Cable: Standard CAT6, maximum device-to-device length = 100 meter Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications. Shipping -Pro packed shipped USPS, UPS or Freight Service. Contact us pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed shipped. Processing times vary, 2-30 days Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. What products can not be returned? - International Sales Clearance items, Custom Builds, Road Cases, DT12 items, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, turntable cartridges, fog fluid